Make a DIY Book Stool for Your Classroom - WeAreTeachers

Flexible seating is all the rage in classrooms these days, and nosotros beloved finding creative ways to offer it. We recently brought you the pool noodle sensory chair, and last year we created an inner tube reading chair. Now we're bringing yous this book stool, made from a gym scooter and old books.

Yep, we assure you that no books were harmed during the making of this flexible seating stool. Nosotros actually used books that were headed to the recycling bin!

For this project, we found that it worked best to use books all about the same size because that allowed us to stack them perpendicularly and make a perfect foursquare. Our books were sized roughly five inches by vii inches, but you can accommodate and stack as you run into fit. We'd beloved to run across someone make a dictionary or encyclopedia stool! Here's a video of how ours turned out.

[embedyt] https://world wide web.youtube.com/watch?five=FvwR4EhhnRg[/embedyt]

Just a heads upwards, WeAreTeachers may collect a share of sales from the links on this page. We just recommend items our team loves!

What You Need

• Old books
• Gym scooter
• Hot gum gun & Gorilla gum sticks
• Scissors
• Staple gun
• Plywood
• Foam
• Fabric

What to Do

Find the right books and do stacking.

The trickiest thing most this project is finding a good design to make the books all fit together. If you lot use differently sized books, it's a chip of a puzzle. We recommend collecting old books that are all like in size. Then test information technology out on your scooter before you lot mucilage anything.

Hot gum your base of operations.

It'due south important to accept a good base, so you might even give it a couple of layers to make sure it's sturdy.

Mucilage your other books, one layer at a time.

We used Gorilla hot gum sticks because they take a stronger hold than many regular glue sticks.

Measure and cut your foam tiptop and plywood.

You want your cream and plywood to be just a little chip larger than your scooter base. Our scooter was about a 12-inch square, and so we added a couple of inches all around.

Measure and cutting your material top; then staple.

Your fabric foursquare should be even bigger than your plywood and foam. (Nosotros added about 4 inches to the square.) So pull information technology tight effectually the foam piece and staple it to your plywood square.

Secure the top into place.

This is another area y'all'll want to exist secure. Be generous with your glue then apply pressure (or sit on it) for several minutes. Yous could switch to the Gorilla liquid glue for this, but keep in heed that information technology volition aggrandize, and then watch for drips.

Test it out.

This book stool would be perfect in any reading area. It would also make a practiced special person's chair or a great place to sit when students get to share about themselves or get chosen for show and tell.

Do you have flexible seating ideas? Come and share in our WeAreTeachers HELPLINE groupon Facebook.

Plus, don't forget the instructions for making our puddle noodle chair.

szaboknespolow1961.blogspot.com

Source: https://www.weareteachers.com/bookstool/

Share this post